1. Camber shapes
2. Special perforations/stamping
3. Tensions
4. Standard perforation area
5. Burr and burr side
6. Tolerances
7. Short/excess delivery
8. Perforation position related to the external dimensions
9. Perforation width (w) and division (t)
10. Standards and descriptions
11. Edges
12. Delivery conditions
13. Geometry
14. Taper of the perforation

Which thicknesses and perforation widths can be produced?

Perforated sheet metals, plates, blanks, coils from the different materials are manufactured by us in thicknesses of from 0.05 mm to 20 mm and perforation widths from 0.6 mm to 160 mm and subsequently processed.

Which perforations can be converted?

In principle we are able carry out any technically executable punching in as good as all materials because we have a large number of machines and tools as well as a modern, equipped construction plant.

What else does SHS offer?

Bending, welding, torch cutting, surface technique, lacquer finish, anodic coating, galvanising complete our broad spectrum.